Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » serpentine belt diagram for 2000 ford lightning
Viewing all articles
Browse latest Browse all 10

1994-2003 Chevy S10 Pickup Serpentine Belt Installation Instructions

0
0

The 1994-2003 Chevy S-10 pickups have the identical serpentine belt-routing course of. The serpentine belt is one full belt that controls the entire accent pulleys on the front of the engine. As soon as the serpentine belt breaks, it causes the entire equipment on the engine to cease working. The serpentine belt on the 1994-2003 Chevy S-10 pickup could be changed in only a matter of minutes.

Chevy S10 Pickup Serpentine Belt Installation Instructions

Open the hood and find the serpentine belt tensioner. The belt tensioner is what retains the stress on the belt in order that the belt doesn’t come off of the pulleys. The belt tensioner is situated instantly under the alternator. The tensioner has a three/eight-inch sq. opening proper beneath the pulley on the tensioner.

Find the serpentine belt-routing diagram on the highest of the fan shroud above the radiator. The diagram shall be a drawing of the serpentine belt being routed across the pulleys. If you happen to cant discover a serpentine belt diagram, take a pen and notepad and draw out the precise course that the serpentine belt is routed throughout the pulleys and the tensioner.

Slide the three/eight-inch drive pull bar into the sq. opening on the belt tensioner. Flip the belt tensioner counterclockwise to alleviate the strain off of the belt. Slide the belt off of the belt tensioner along with your different hand. Let the tensioner return to its regular spot. End remove the serpentine belt from the remaining pulleys. Pull the belt out and set it to the facet.

Slide the belt in and put the belt across the crankshaft pulley first. Then, observe the belt-routing diagram for routing the belt throughout the remaining pulleys. You’ll want to depart the belt tensioner for final. That is so will probably be simpler so that you can slide the belt on the tensioner whereas holding the tensioner over. Slide the three/eight-inch drive bar again into the sq. opening on the belt tensioner. Flip the belt tensioner clockwise. Slide the belt excessive of the belt tensioner. Launch the belt tensioner in order that it tensions towards the belt. The tensioner will maintain the correct rigidity towards the belt.

Examine the belt to ensure it’s routed the precise method that the diagram reveals. Additionally, examine to make certain the belt is totally seated into the pulleys. Crank the engine. Whereas the engine is operating, return and examine the belt once more to be sure that the belt is operating evenly over the belt tensioner and that the belt stays seated within the pulleys. Flip off the engine and shut the hood.

[source ehow.com]


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images